Article ID : 00027134 / Last Modified : 03/09/2022

No picture show on the Television receiver when continued to an Audio/Video device using an analog cablevision

If you are using a composite or component cablevision, to connect your TV directly to an A/V device or through the audio system, the moving-picture show and sound may exist frequently interrupted, or the edges of the motion-picture show may seem discolored.

Before you offset

  • If in that location is no pic on the TV screen when using an HDMI cablevision, refer to: there is no picture when using an HDMI® connectedness .
  • Make sure your Idiot box has the recent system software installed. System software updates are available for certain LCD TVs. Downloads are posted on your model support page.
  • If model-specific information is needed to complete whatever of these steps, check your product transmission. Manuals are posted on your model support page.

Notation: The BRAVIA Connectivity Guide can provide yous a customized hookup based on the available connection jacks on your A/V devices.

Troubleshooting Steps

  1. Cheque if the input setting of the Idiot box is fix to the input where the A/V device is connected.
    • Brand certain the TV and the A/5 device (such as a Blu-ray Disc™ thespian) are powered on.
    • On the TV remote control, press the INPUT button then switch the input to where the A/5 device is continued, and check if a picture appears on the Telly screen.
    • The epitome below provides an example of an A/V device connected to the input of the Goggle box

      Video 1 input

  2. Check if the cable is firmly connected to the TV and the A/V device and brand certain it is not loose.
  3. Cheque if the input setting on the audio organization (such as an amplifier or theater stand up) is prepare to the input where the A/V device (such as a Blu-ray Disc™ player) is connected. The image below provides an case of the connexion.

    A/V device (Instance: BD/DVD player) → Audio organisation (Example: AV Amplifier) → Idiot box

    Connection of A/V device to a TV

    1. Select the appropriate input method according to your device's specifications.
    2. If in that location is no picture on the TV screen, and if y'all have a spare video cable endeavor the post-obit connection [A]. Connect the A/V device directly to the TV and non through the audio organization using the video cable. Then, check if a flick appears on the TV screen.

      A. Video cable connexion → B. Audio cable connection
      ane. A/Five device (Example: BD/DVD player) → 2. Sound arrangement (Instance: AV Amplifier) → 3. Goggle box

      Connection of A/V device directly to a TV using an video cable

  4. Cheque the input port of the TV
    1. Connect the cable to another input port on the TV.
    2. Printing the Input button on the TV'due south remote control so switch the input to the one that corresponds with the input port that you continued in stride 1, and bank check if a picture appears on the TV screen.
  5. Connect another A/V device to the TV
    • If you take another A/V device, connect information technology to the same input port on the TV as the original A/V device then check if a picture show appears on the Tv screen.
  6. Power reset the TV and the connected devices.
    Somentimes the issue is caused past external factors such as your network service or the connected devices, resetting the devices may improve the state of affairs.
    1. Turn off the connected device and the TV, and unplug the ability cords.
    2. Go on them unplugged for two minutes.
    3. Plug the power cords dorsum into the electrical outlet.
    4. Turn on the connected device and the TV.
  7. Perform a factory reset.
    • Reset your LCD Television
    • Reset your Android Tv set

Important:

  • If your A/V receiver has a convert function, it may be necessary to actuate this in the menu when using more than one connexion type in the hookup. Check the manual supplied with the unit to see if your A/V receiver has this function.
  • If your A/V receiver isn't capable of upwards-converting signals, make certain that the type of video cable being used between your source (DVD, cable box, etc.) and the A/Five receiver is the same type of video cable that is being used between the A/V receiver and the television.
  • A composite or Due south-Video signal that is upwardly-converted to a component or HDMI bespeak may not display considering of copyright protection encoded in the video signal.

The troubleshooting steps listed above should resolve your issue. If the upshot withal occurs afterwards trying the steps to a higher place, repair may be required.  Become to Product Repair.

Related Manufactures

  • Customs

    A identify where you can observe solutions and ask questions